Husky Hi- Rib
24 GAUGE - 36" COVERAGE
Husky panel covers 36” and is composed of four major ribs, 12” on center and 1/4” high. The stiffener ribs between the major ribs are symmetrical with the flat areas to provide an attractive appearance.
Materials
Husky panel is available in both Zincalume and pre-painted Zincalume steel. All material conforms to ASTM A-446 Grade E (80,000 lb yield strength).
Paint Coating
The paint coating on the Husky panel is a durable baked on (SMP) silicone modified polyester finish.
Installation
Mesa
29 GAUGE - 36" COVERAGE
Mesa panel covers 36″ and is composed of minor ribs. Mesa panel provides a tough, durable wall panel with easy installation using an S Lock panel joint.
Materials
The panels are available in both zincalume and pre-painted Zincalume steel.
Paint Coating
The paint coating on the Mesa panel is a durable baked on (SMP) silicone modified polyester finish.
STANDING SEAM
22 - 24 GAUGE
The Standing Seam panel is a concealed fastener panel with butyl injected seams designed for commercial and shallow pitch roofing systems. Standing Seam panels are generally onsite roll formed, from 22 or 24 gauge steel or .032 to .063 aluminum materials. Panel width selections are from 12 to 24 inches, with a 1-1/2 or 2 inch rib height. For a specific appearance, panels can be formed with either pencil ribs or striations, to include a large selection of Kynar color options or custom colors. The panels are installed with butyl injected clips and fasteners and mechanically seamed with either a 90° or 180° rib. Standing Seam panels are UL-90 rated with ASTM E-1592, E-1680, and E-1646 testing. All Standing Seam products are manufactured on a special order basis.
Materials
The panels are available in pre-painted Zincalume steel.
Paint Coating
The paint coating on the NorStar panel is a high quality SMP (Silicone Modified Polyester) finish.
Wave Panel
7/8" WAVE PROFILE
The 7/8″ Wave panel provides 37-5/16 inch wall and 34-11/16 inch roof coverage and is composed of major S-shaped ribs at 7/8 inches tall and 2-11/16 inch on center. This product can be utilized as a roofing, liner and/or siding panel. Most commonly it is utilized as a an accent or wainscot panel for interior and exterior walls.
Materials
The panels are available in pre-painted Zincalume steel.
Paint Coating
The paint coating on the NorStar panel is a high quality SMP (Silicone Modified Polyester) finish.
Don't See A Panel?
Give us a call, we can possibly special order it, or make it on our new computerized RAS TURBObend Metal Folding System.
